Zaxcom IFB100, Руководство пользователя

Страница: 37 / 99

Zaxcom Digital Wireless System User’s Manual_______________________________________Chapter 2
37
•
NON-LOOP RECORD
– Once the media has filled up, recording stops and
FULL
is displayed. This
prevents over-writing any portion of the audio.
•
LOOP RECORD
– Once the media has filled up, the new audio will begin over-writing the oldest
audio on the card.
Audio Transmitter Power page
TX POWER: 10MW
Page purpose: This page is available on hardware after Serial #2007 and maintains the audio transmitter’s
output power.
Parameters: [
10MW
] / [
25MW
] / [
50MW
] / [
100MW
] (
100MW
is optional)
Use the lowest power setting for a given situation to conserve battery power.
NOTE : there is about a 25% reduction in power consumption between the
50MW
and
10MW
settings.
Boot Up Mode page
BOOT UP IN
NORMAL MODE
Page purpose: This page maintains whether or not the unit will boot up in Normal or Standby (Low Power)
mode.
Parameters:
•
STANDBY
– The unit boots up in Standby mode (a low power state). Press the MENU key, to go to
full power.
•
NORMAL
– The unit boots up in Normal mode.
Mute Switch Enable page
MUTE SWITCH: (0)
DISABLED
Page purpose: TRX900 ( /AA) ONLY - This page enables/disables the mute switch and assigns which direction is
‘ON’.
Parameters:
•
(0) ENABLED NEGATIVE
– The switch is enabled and its function is reversed.
•
(1) ENABLED POSITIVE
– The switch is enabled in its normal position.
•
(0) DISABLED
– The switch is disabled.
Left/Right Switch Mode page
LR SWITCH MODE:
OFF
Page purpose: This page assigns a button (or buttons) to enable a private line to the Mixer.
Parameters:
•
ON:(ALL KEYS)
– Press any key to activate.
•
ON: DOWN KEY
– Press the DEC key to activate.
•
ON: MENU KEY
– Press the MENU key to activate.
•
ON: UP KEY
– Press the INC key to activate.
•
OFF
– This option is disabled
Normally, in mono mode, the audio is sent to the left channel of a stereo receiver. Pressing the key assigned by
this page sends the audio to the right channel only for as long as the key is pressed. In addition, if the individual is
listening to the IFB connection, a low frequency tone is added to indicate that they are on the private line.