Chapter 6_______________________________________Zaxcom Digital Wireless System User’s Manual
66
This page works like the
Lock page
. The only difference is that while the unit is locked using
Power-up Mode
,
every time it is powered up, the keys will be locked and it will be necessary to unlock them before you can
view/change anything.
Unlocking the IFB100
Simultaneously press the
MENU
and
INC
keys. Once it is unlocked, the screen will display the
Pacifier page
.
Timecode Jam Mode page
TC JAM MODE:
AUTO-LOAD
Page purpose:
This page maintains how received timecode will be used.
Parameters:
•
AUTO-LOAD
– start and stop the transmitter’s recorder when the input, based on the
Timecode
Source page
selection, starts and stops.
•
AUTO-JAM
– jams timecode continuously, based on the
Timecode Source page
selection.
•
MANUAL (OFF)
– jam timecode once, based on the
Timecode Source page
selection.
Timecode Source page
TC SOURCE:
SIDE CONNECTOR
Page purpose:
This page sets the timecode source.
Parameters:
•
SIDE CONNECTOR
– Accepts the timecode for syncing from the side connector.
•
IFB (RF)
– Does not apply to the IFB.
•
AUDIO INPUT
– Accepts the timecode for syncing from the Audio Input connector.
Timecode Output Enable page
TIMECODE OUTPUT:
OFF
Page purpose:
This page enables/disables timecode output and specifies the output connector.
Parameters:
•
ON: OUTRIGHT
– Sends timecode to the timecode output connection on the side.
•
ON: OUTLEFT
– Not currently used (for future expansion)
•
OFF
– Timecode is not output.
Remote Control Group ID page
REMOTE CONTROL
GROUP CODE=1
Page purpose:
This page sets the Group ID # for this IFB100.
Parameters:
[value range:
0
to
99
, step:
1
]
To use the remote control function, a group code must be selected. If it has not been selected, the IFB100
remote control is not enabled.
When setting the group code, be sure it is unique. This is very important when multiple wireless groups are in the
same area, since any IFB100 on the same group code as yours can affect your TRX9xx/ZFR1xx units. To avoid
this, coordinate with others in the area and ensure everybody is on a separate group code.
Once the group code is set, multiple TRX9xx/ZFR1xx units can be controlled remotely.