Zavio P8220, Быстрое руководство по установке

Страница: 5 / 8

5
e) Hook up the safety wire between the wall mount bracket and the camera.
f) Connect power, RJ45 or I/O wires, and use foam tapes or seal foam to ensure the
back-end connection is waterproof.
g) Put all cables inside the wall mount and fix the following circled 3 screws.
B. RJ45 waterproof connector
1. Make sure all components are assembled as shown on the below graph.
2. Check that the Ethernet Port and the Waterproof main body are tightly fasten.