Zavio F531E, Руководство пользователя

Страница: 56 / 72

F531E & F731E User Manual

Parameter: the parameter of CGI (defined in URL of HTTP →
General) is from your target device. For example, move=down.

Message: message will show up in the form of Message = PTZ
down. If your target device didn’t support the parameter of
message, you can’t see the message. So you can just take the
message as a note. For example: PTZ down.

Use Alarm Buffer : Select Use alarm buffer when you forward the
image / audio of before and after the alarm detection (pre-alarm,
post-alarm). If you do not select it, only the image of the moment of the
alarm detection is forwarded. Click
Alarm buffer to display the Alarm
buffer setting menu.
Note:
You can set the alarm buffer function at alarm buffer page. (Please go
“Setting
→ Advance → Alarm buffer → Setting”)

Parameter: the parameter of CGI (defined in URL of
HTTP → General) is from your target device. For example,
move=down.

Message: message will show up in the form of Message = PTZ
down. If your target device didn’t support the parameter of
message, you can’t see the message. So you can just take the
message as a note. For example: PTZ down.

Alarm Input: Select the connected alarm. Sensor input1 : The external
sensor which is connected to sensor input1 of the alarm input.
Note:
You can set the alarm input function at alarm input page. (Please go
“Setting
→ Advance → Alarm input → Setting”)
55