Zavio F531E, Руководство пользователя

Страница: 25 / 72

F531E & F731E User Manual
 Reboot : Click this bottom to reboot. A confirmation dialogue will appear
and then click “OK” to process. It takes two minutes to reboot this IP Camera.
 Factory Default : Click this bottom to reset this IP Camera to the factory
default setting. A confirmation dialogue will appear and then click “OK” to
process. Don't turn off this IP Camera until the device reboots.
 Backup Setting : You can save the setting data of this IP Camera into a file.
Click “Save” and follow the instructions on the browser to save the setting
data file to your specified location.
 Restore Setting : Download the saved setting data of this IP Camera. Click
“Browse” and select saved file. Click “OK” and this IP Camera is adjusted
according to the loaded data and then restarted.

Firmware Update : Upgrade the device software. Click “Browse” and
select the file for upgrading. A confirmation dialogue will appear. Click “OK”
to start upgrading. This IP Camera will reboot upon completion.
Note:
Use only upgrade files that are special for this IP Camera. Otherwise
problems may occur. Don't turn off the IP Camera power or disconnect
the network until the upgrading is completed.
Note:
After upgrading new firmware, please execute “Factory Default” first to
make it work.
 Upload Language Pack : Upgrade the device language pack. Click
“Browse” and select the file for upgrading. A confirmation dialogue will
appear. Click “OK” to start upgrading. The upgrade is applied immediately.
The default language is “English.”
24