Maintenance
Structure
Eight purification technology ensures air quality:
HEPA filter-Active carbon filter-Cold-catalyst filter-Active carbon filter-Alumina-based
photo-catalyst net-UV-Anion-Ozone
Parts
Maintenance Methods
Machine
Wipe out dust and dirt with soft cloth that has detergents. Once per month.
Front cover
Wipe out dust and dirt with soft cloth that has detergents. Once per month.
Dust collection
filter
Clean dirt with vacuum cleaner. Before installation, it must be absolutely dry. Once
per month.
·Don’t use the vacuum cleaner to clean the bottom of dust collection filter (the white
part).
·Don’t wash it with water (Some functions can be destroyed.).
Active carbon filter
No need to wash
·Don’t wash it with water (Some functions can be destroyed.).
Alumina-based
photo-catalyst net
No need to wash
·Remove the 4 screws by a screwdriver, and replace the new one, and fix it with the 4
screws by a screwdriver.
UV light
After removing all filters, remove two screws and the metal pieces, cut off the wire of
UV by scissors forceps, and replace the new UV light with a soldering iron to solder
the wires. Then install alumina-based photo-catalyst filter and all filters.
CAUTION
.7.
.8.
·When using detergent, please make sure that it is diluent neutral kitchen detergent.
·Don’t use these detergents.
(Such as cleanser, alkaline detergent, coal oil, alcohol, decolourant and diluent.)
Front Cover
Front Cover
Touch Panel Display
Machine
Alumina-based
Photo-Catalyst Net
Active Carbon Filter
Efficient and Composite Filter
(
Including HEPA filter, active carbon
filter and cold-catalyst filter
)