Zartek CDP-808 Скачать руководство пользователя страница 5

 
The handset is portable and rechargeable giving you the convenience of answering the gate from 
anywhere in the house, garden and pool. A large LCD screen indicates house number, ring type, 
incoming or outgoing calls, door opening etc.  Each handset includes a mains adaptor, charging cradle 
and rechargeable battery. 
 
Communication is very clear and working range is typically 350m in built-up areas and 800m line-of-
sight. Operation of the handset is essentially like a two-way radio as all communication is done via a 
PTT button. Handsets are able to receive communication from the gatestation once a call is active and 
respond by pressing the PTT button. 
 
 A call can be made to the gatestation at any time even when the system is idle. This feature is used to 
contact a guard by the gate.  
 
Handsets are also able to communicate with other handsets in the same house if they all share the same 
code. As many handsets can be added and all will ring when a call is made from the gate. There are 2 
gate release buttons on the handset to trigger separate gates.  
 
Each handset is given a unique 3 digit code when it is programmed to the gatestation. This code is the 
handsets number or house’s unit number. Different coded handsets cannot speak to each other. 
 

Installation of battery and charger 

 
The handset is equipped with a removable rechargeable battery pack. Unscrew battery cover and place  
battery as described on the battery. Plug the mains adaptor into the wall socket and connect the other 
end to the desktop charging cradle. There is an indicator light on the desktop charger which flashes 
when charging and remains on when full. Charging time is approximately 4 hours and the handset can 
be always placed in the charger to keep it powered up always with a trickle charge. A battery level 
indicator on the screen will show the battery level and charging status. Once the handset is removed 
from the charger, the battery life is approximately 5 hours with average use.  
 
 
 

 

 
 

Function of buttons 

(please refer to Figure above) 

 

K6 Call alert select button 

K4 Lock A button 

K5 Lock B button 

K3 Call reply/ Calling gate station button    

 

K9 Volume down button 

K2 Hang Up/Power ON/OFF button 

K1 Handset calling button 

K8 Ringing tone time select button 

K7 Volume up button 

Doorbell visual light 

Microphone 

Speaker 

Содержание CDP-808









Отзывы: