A motion sensor will detect visitors coming within 3m of the gatestation and the screen and keypad will
light-up and be active. There is a back-up battery fitted into the gatestation which will power the unit for
4 hours in case of a power outage.
The installer will be equipped with the programming cable or pin codes to program the gatestation. Any
changes to displayed names, house numbers or additional handsets can be made via gatestation
programming.
Outline of call procedure:
Visitor presses 3 digit code and # key on gatestation to call
Handset rings and resident answers by pressing PTT
Visitor speaks when prompted
Resident presses PTT to speak or Lock A or B to trigger gate
Resident ends call
Operation
1)
Under
standby mode
, the LCD will show following :
FOR MULTIPLE USER MODE
“ENTER 3 DIGIT No.
PRESS # TO CALL”
and
“ TO SEARCH FOR NAME
PRESS **# “
FOR SINGLE USER MODE (with one Programmed Residence Name)
“ PRESS # TO CALL”
2)
To
call a house
or specific handset
MULTIPLE USER
Press the concerned house 3 digit number , then press #.
SINGLE USER
Just press #.
Note : A beep sound will be heard for each valid entry on keypad.
UP key
LCD
screscre
“
#
”
key
ENTER key
DOWN key
Alphanumeric keys
“
*
”
key