zarges ZAP Z600, Инструкция по сборке и эксплуатации

Страница: 9 / 16

8
4. Assembly
4.1 Safety instruc-
tions for
assembly
• Observe the safety instructions in " 2.3 General safety instructions ".
• The order for assembly as shown in the illustrations must be observed.
4.2 Assembly
instructions
The assembly instructions are in the form of diagrams.
4.3 Final steps After assembling the product, check the following:
> Have all parts included in the scope of delivery been fittedř
> Have all bolted connections been tightenedř
5. Use
5.1 Safety instruc-
tions on use
Observe the safety instructions in " 2.3 General safety instructions ".
W
ARNING
D
ANGER TO LIFE AND LIMB CAUSED BY FALLING FROM THE PRODUCT
!
Follow these basic rules to prevent dangerous situations arising:
> Never brace your full weight against the guardrails.
> Do not climb on the guardrails. Do not climb on the outside of the product.
> Do not jump on the treads or the platform.
> Do not use the product if it is soiled with substances which might cause you to
slip (oil, grease etc.).
W
ARNING
D
ANGER TO LIFE AND LIMB IF THE PRODUCT TOPPLES OVER OR COLLAPSES
!
Follow these basic rules to prevent dangerous situations arising:
> Always use the ladder elements to climb onto the product.
> Do not exceed the maximum permissible load.
> The product must not be used by more than one person at a time.
> Do not increase the platform height by using ladders, boxes or other devices.
> Do not subject the equipment to one-sided loads. Always distribute loads
evenly on the platform.
> Do not use the product directly adjacent to unsecured doors and windows.
However, emergency exits must not be locked.
> Do not use the product on slippery surfaces (e.g. moisture, ice, snow or soiling).
> Do not attach advertising placards or objects which could increase the wind
load.
> In the event of high winds, evacuate the platform ladder, move it to a wind-shel-
tered position with the help of several other persons and take appropriate
measures to secure it against toppling over (e.g. fit anchors).
See illustrations section of this manual.
1-5