ELEGANT WITH DECK
Sand
30 lbs
(not included)
Sand
Contents of the Accessory box SKU # 1002-HRK
x32
(¾ IN.)
x2
x2
x2
x4
SCREW KIT 140-0006
(2 IN.)
x8
x8 x4 x4
(2 ½ IN.)
Required tools
(not included)
A
1)
Assemble the tubes to the step with the screws,
washers and nuts provided.
2)
Slide the lateral supports over the posts.
Step Shell
A B C D E
Phillips #2
Phillips #3
7/16 wrench
Phillips bit
x4
x8
x4
E
C
D
REV. 03/06/2020 PN:
PG:1
2257 route 139
Drummondville, Québec
J2A 2G2
1 year on pool step.
1 year on hardware.
MANUFACTURER WARRANTY
WWW.INNOVAPLAS.COM
WARNING
Install the step on a flat surface.
Do not jump or dive from the step.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer’s instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
inside step
