18
Zaptec Charger AS may use a cellular network data connection to gather product specific
diagnostic reports and provide over-the-air firmware updates. More information on our privacy
policy can be found at
zaptec.com/privacy
.
Storage and Maintenance
The product should be stored in a dry space with the EV plug cover shut.
The cables, mains plug and EV plug must be inspected for damages and foreign debris periodically.
The fan and vents of the Isolation Unit must be kept free of foreign debris as described by the steps
below.
1.
Ensure that the mains plug and EV plug are disconnected.
2.
Place the Isolation Unit horizontally on a flat surface with natural drainage.
3.
Pour a steady stream of fresh water into the inlet vent until the water leaving from the outlet vents
are free from debris.
4.
Drain the Isolation Unit for a few minutes by placing it vertically.
Warranty
We warrant that the unit will be free from defects in materials and workmanship as stipulated by
consumer protection laws or regulations in the country of purchase or residence. More information
on rights provided by consumer law can be found at
zaptec.com/warranty
.
Support and Repair
If a problem is discovered, refer to the
Troubleshooting
section prior to contacting us at
zaptec.com/support
.
Inlet Vent
Outlet Vent
Outlet Vent
Place on a flat Surface
i
