Zapf Creation Baby born Brother, Инструкция пользователя

Страница: 8 / 56

8
EN
General information:
We recommend carefully reading the user instructions before using the product for the first time and storing the
instructions with the packaging in case you need them at a later point in time.
Functions
1. I am mobile.
Thanks to the joints in her arms, legs and the head, the doll is fully articulated. She can stand on her own or sit
comfortably. (Fig. 1&2)
The mobile joints are (fig. 3):
- Head (1)
- 2x shoulder (2)
- 2x legs (3)
- 2x knees (4)
2. I can drink.
Fill the bottle that comes with the doll with fresh tap water and screw the drinking attachment firmly onto the
bottle.
Hold the doll across your arm at an angle so that the bottle tip is facing down and can be pushed straight into
the doll’s mouth. Fully insert the tip of the bottle.
The water can now be fed to the doll by gently and repeatedly squeezing the bottle – but no more than one-
third of the content.
The water tank is full when water flows from the doll’s mouth.
Warning: Use fresh water only. Other liquids can block the tubes and tanks inside the doll.
3. I can cry.
The doll can cry real tears. But first, she needs to be fed with water. Then grasp the doll with both hands under
her arms and press the middle of her chest several times using your fingers or thumbs.
The tears start to flow.
If the desired effect does not materialise, please feed the doll with clear water again and then press the middle
of her chest.
4. I can take a bath.
If the doll is bathed at home, please only use the BABY born bathtubs or bathe the doll in a suitable container.
When bathing, use cold or tepid water and choose commercially available bath additives suitable for children.
If the doll is taken to a swimming pool or the beach, please do not play with the doll in the chlorine water or
salt water for longer than 1 hour, as chemical reactions or bleaching of the doll may occur.
The 1-hour limit also applies to the bathwater in the BABY born bathtub or the container suitable for dolls. The
doll should not be submerged completely under water.
1. It is essential that you rinse and clean the doll with clear water after bathing.
If water has entered the doll, please remove the water before playing with and using the functions of BABY
born. Observe the information on cleaning and drying.
2. When playing with the doll in the BABY born bathtub or other suitable container, water can enter the tubes
and tanks. It is therefore vital to clean the tube system inside the doll immediately after bathing. Please
read the information on cleaning for further details.
3. Important! Avoid bathing the doll together with your child in the bath. Incomplete cleaning and/or drying
after a previous bath could result in unhealthy germs and bacteria forming inside the doll.
4. The doll is not suitable for use as a floatation device.
5. Do not use cosmetic or skin care products on the doll.
6. Do not leave the doll in direct sunlight for extended periods of time (max. 1 hour).
7. Do not subject the doll to high temperatures (45°C or higher) for extended periods of time.
Information on cleaning and drying:
To be done by an adult.
Cleaning the doll
In case of external soiling, the doll can be cleaned with a damp cloth and commercially available detergents.
To rinse the tubes and tanks inside the doll, feed with warm (38°C) water (refer to “I can drink.”). Then press the
chest several times so that the water is pushed into the eyes (refer to “I can cry.”). Repeat this process several times
until the water stops flowing and the tank and tubes are empty. Wipe the mouth, face and eyes with a dry cloth
and leave to air dry.