Zanussi ZYB 594, Руководство пользователя

Страница: 15 / 20

End time for Pyrolytic cleaning
You can set the end time for Pyrolytic cleaning with
the clock function End .
1. Do again step 1,2 and 3 from above procedure.
2. Press .
The display shows an arrow and the symbol . The
display shows the time for the end of Pyrolytic clean-
ing.
3. Press or to adjust the time for the end of the
Pyrolytic cleaning.
Shelf Support Rails
Removing the shelf support rails
1
Pull the front of the
shelf support rail away
from the side wall.
1
2
2
Pull the rear shelf sup-
port rail away from the
side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
The rounded ends of the shelf support rails must
point to the front!
Oven lamp
Warning! Be careful! There is the risk of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the cir-
cuit breaker.
Put a cloth on the bottom of the oven for protection
of the oven light and glass cover.
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C
heat-resistant oven light bulb.
Use the same oven lamp type.
4. Install the glass cover.
Cleaning the oven door
The oven door has four panels of glass. You can remove
the oven door and the internal panels of glass to clean
them.
The oven door can close if you try to remove the
panels of glass before you remove the oven door.
Removing the oven door and the glass panels
1
Open the door fully
and hold the two door
hinges.
2
Lift and turn the levers
on the two hinges.
3
Close the oven door to
the first opening position
(halfway). Then pull for-
ward and remove the door
from its seat.
4
Put the door on a soft
cloth on a stable surface.
5
Release the locking
system to remove the pan-
els of glass.
90°
6
Turn the two fasteners
by 90° and remove them
from their seats.
15