Zanussi ZYB 594, Руководство пользователя

Страница: 6 / 20

2. Let the appliance operate without the food for approx-
imately 1 hour.
3. Set function
and maximum temperature.
4. Let the appliance operate without the food for approx-
imately 10 minutes.
5. Set function
and maximum temperature.
6. Let the appliance operate without the food for approx-
imately 10 minutes.
This is to burn off the residue in the appliance. The acces-
sories can become more hot than usually. When you pre-
heat the appliance for the first time, the appliance can
make an odour and smoke. This is the usual effect. Make
sure the airflow is sufficient.
Daily use
Warning! Refer to "Safety information" chapter.
The display
1 2 3
1 Cooking function
2 Temperature
3 Time
Button Function Description
ON/OFF To switch the appliance on or off.
SELECTOR To set the oven function.
RAPID HEAT UP To switch the rapid heat-up function on.
PYROLYTIC CLEANING To start the Pyrolytic cleaning.
/
PLUS, MINUS To adjust the values (temperature and time).
CLOCK To set the clock function.
Setting the oven function
1 2
1. Push again and again until the symbol for the
necessary oven function flashes.
The display shows an automatic temperature. If you
do not change the temperature in approximately 5
seconds, the appliance starts to operate.
2. To change the temperature, push or button.
If there is a power cut, the programmer keeps all the
settings for approximately 3 minutes. After more
than 3 minutes without power supply, you have to do the
settings (also the time of day) again.
If you start an oven function, the symbol of the tem-
perature flashes.
The symbol shows that the temperature in the appliance
increases.
When the appliance is at the set temperature, an acoustic
signal sounds and the symbol of the temperature stops to
flash.
6