background image

• Make sure that the parameters on the rating

plate are compatible with the electrical

ratings of the mains power supply.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Should

the mains cable need to be replaced, this

must be carried out by our Authorised

Service Centre.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• Do not touch the mains cable or the mains

plug with wet hands.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• This appliance complies with the E.E.C.

Directives.

Water connection

• Do not cause damage to the water hoses.

• Before connection to new pipes, pipes not

used for a long time, where repair work has

been carried out or new devices fitted (water

meters, etc.), let the water flow until it is

clean and clear.

• Ensure that there are no visible water leaks

during and after the first use of the

appliance.

• Do not use an extension hose if the inlet

hose is too short. Contact the service centre

for the replacement of the inlet hose.

• You can extend the drain hose to maximum

400 cm. Contact the service centre for the

other drain hose and the extension.

Use

WARNING!

Risk of injury, electric shock, fire,

burns or damage to the appliance.

• This appliance is for household use only.

• Follow the safety instructions on the

detergent packaging.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

• Make sure that all metal objects are removed

from the laundry.

• Do not wash fabrics which are heavily soiled

with oil, grease or other greasy substances.

It can damage rubber parts of the washing

machine. Prewash such fabrics by hand

before loading them into the washing

machine.

• Do not touch the glass door while a

programme is in operation. The glass can

get hot.

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the mains

electrical and water supplies.

• Cut off the mains electrical cable close to

the appliance and dispose of it.

• Remove the door catch to prevent children

or pets from becoming trapped in the drum.

• Dispose of the appliance in accordance with

local requirements for the disposal of Waste

Electrical and Electronic Equipment (WEEE).

4

www.zanussi.com

Содержание ZWF 81460W





















Отзывы: