background image

2.

To use liquid detergent:

1. Remove the drawer. Push the drawer

edge in the place with the arrow (PUSH) to

remove the drawer easily.

3.

B

2. Adjust the flap in position B.

3. Put back the drawer in the recess.

When you use the liquid detergent:

• Do not use gelatinous or thick

liquid detergents.

• Do not put more liquid then 120

ml.

• Do not set the delay start.

When the flap is in position B and you want to

use powder detergent:

1. Remove the drawer.

2. Adjust the flap in position A.

3. Put back the drawer in the recess.
• Measure out the detergent and the fabric

conditioner.

• Put the detergent and the fabric conditioner

into the compartments.

• Carefully close the detergent drawer.

Activating the appliance

Press and hold for a couple of seconds the

On/Off button to activate or deactivate the

appliance.

A tune sounds when the appliance is activated.

Setting a programme

1. Touch the programme button   and set the

programme:

• The indicator of the button 

 flashes

slowly.

2. If necessary, change the temperature and

the spin speed or add available options.

When you activate an option, the indicator

of the set option comes on.

If you set something incorrect, the
indicator of the button 

 flashes

red three times.

Starting a programme without the delay

start

Touch the button 

 .

• The indicator of the button 

 stops to

flash and stays on.

• The programme starts, the door locks,

the indicator 

 is on.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

Starting a programme with the delay

start

The start of the programme can be delayed by

9, 6 or 3 hours.
1. Touch the button Delay Start  to choose

the delay you want to set.

The indicator of the selected delay is on.
2. Touch the button 

 :

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the delay start before you touch the
button 

 . After touching the

button 

 you can only cancel the

delay.

www.zanussi.com

11

Содержание ZWF 81460W





















Отзывы: