Clean control panel and housing
Caution!
Do not use furniture cleaners or
aggressive cleaning agents to clean the
machine.
Use a damp cloth to wipe down the control
panel and housing.
What to do if ...
Troubleshooting by yourself
Certain problems are due to lack of simple
maintenance or oversights, which can be
solved easily without calling out an engineer.
Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that the
red Start/Pause pilot light flashes to indicate
that the machine is not working.
Once the problem has been eliminated, press
the Start/Pause button to restart the pro-
gramme. If after all checks, the problem per-
sists, contact your local Service Centre.
Problem
Possible cause
Remedy
Dryer does not work.
Mains plug is not plugged in or fuse
is not working correctly.
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Loading door is open.
Close loading door.
Have you pressed the START/
PAUSE button?
Press the START/PAUSE button
again.
Drying results unsatisfactory.
Wrong programme selected.
Select a different programme the
next time you dry (see “Programme
overview” chapter).
Lint filters clogged.
Clean lint filters.
Fluff filter clogged.
Clean fluff filter.
Heat exchanger clogged with lint.
Clean heat exchanger.
Overloading of laundry.
Observe recommended loading vol-
umes.
Ventilation slots in base area cov-
ered up.
Uncover ventilation slots in base
area.
Residue on inside surface of drum
or drum ribs.
Clean inside surface of drum and
drum ribs.
Loading door does not close.
Fine strainer not in place and/or
large mesh filter not locked in place.
Install fine strainer and/or snap large
mesh filter into place.
When a button is pressed -
no reaction of the machine.
Drying protection. After the start of
the programme, the option can no
longer be set.
Turn the programme knob to
O
off
.
Set the programme again.
Drying cycle ends shortly after
programme starts.
End/Anti-
crease
light illuminated.
Not enough washing loaded or
washing loaded is too dry for selec-
ted programme.
Select time programme
Programme inactive,
Water
Tank
full light illuminated.
Condensate tank is full.
Empty condensate tank, then start
programme with START/PAUSE
button.
28
www.zanussi.com
Содержание ZTK123
Страница 62: ...62 www zanussi com ...
Страница 63: ...63 www zanussi com ...
Страница 64: ...www zanussi com shop 136906101 A 172013 ...