14
Fig. 13
Securing the oven to the cabinet
- Fit the appliance into the cabinet recess.
- Open teh oven door and secure the oven to the kitchen
cabinet with four wood screws, which fit the holes
provided in the oven frame (Fig.13).
When installing an electric plate hob over the oven, the
hob's electrical connection and the oven's one have to be
carried out separately, for security reasons and to let the
oven be taken off the unit easier, if necessary.
FO 0039
Recess dimensions
Height
59,1 cm
Width
56,0 - 57,0 cm
Depth
55,0 cm
Oven cavity dimensions
Height
32,5 cm
Width
42,0 cm
Depth
39,0 cm
Volume
55 l
Technical Data
The following instructions are meant to a qualified
technician, in order to allow him carry out the
installation in compliance with the rules in force.
The building-in and the electrical connection fo the
appliance must be carried out by a qualified and
authorized technician only.
Building In
It is important that the dimensions and materials of the
surround or cabinet into which the oven will be built are
correct and will withstand a temperature increase.
A correct installation will have to ensure a proper protection
against contact with electric parts or merely functionally
isolated parts.
All the units meant to ensure protection have to be fitted
not to be taken away without using any tool.
We recommed not to install the appliance near refrigerators
or freezer, since the heat could affect the performance of
these appliances.
Oven dimensions
The oven dimensions are shown in fig. 11.
Undertop recess dimensions
The recess must have the dimensions shown in Fig. 12.
Fig. 11
Fig. 12
Installation
Heating elements ratings
Bottom heating element
1000 W
Top heating element
800 W
Full Oven (Top+Bottom) (1000 + 800)
1800 W
Simple Grill heating element
1750 W
Double Grill heating element
2550 W
Oven rear heating element
2000 W
Convection fan
30 W
Cooling fan
25 W
Oven lamp
25 W
Maximum power rating (230V - 50Hz)
2600 W
Voltage tension
230/400 V 3N ~ 50 Hz
Noise emissions:
46 ÷ 48 dB (
D
)
FO 0292
FO 0374
