43
Fig. 11
FO 2187
820
600
500
45
600
490
– 2
560
– 2
125
10 mm
Opening for the
gas hob
Front side
of the
furniture
unit
Fig. 12
280 mm
from
the centre of furniture
unit
FO 2188
FO 2189
Fig. 13
General warnings
• This gas appliance must be installed by
qualified personnel only, according to the
manufacturer's instructions and the rules
in force.
• This appliance is supplied with a gas
connection R 1/2" located on the rear
side (Fig. 11). The gas connection
should be fitted with an easily accessible
control. A gas tap is recommended,
provided that this is fitted on the right or
left hand side, at a proper clearance
from the zone which can be affected by
the heat diffusion from the appliance.
• When positioning the gas connection
pipe, ensure that it is not subject to me-
chanical stress or it does not come in
contact with hot surfaces.
Important:
Upon completion of the gas in-
stallation, check the perfect
sealing of all the connections by
means of soapy water or a pro-
per gas leakage solution. Never
use a flame.
Gas connection
Opening for the gas hob
The opening for the gas hob shall comply
with the dimensions given in the diagrams.
• Calculate the position of the opening
starting from the front side of the furniture
unit (do not consider the unit door).
Start cutting from 10 mm from the front
(tolerance: +/- 3 mm). The opening shall
be obtained starting from the exact centre
of the furniture unit. (Fig. 12 - Fig. 13).
• Use a well-shaped woodsaw or any other
precision tool such as a miller. Upon
completion, seal the opening borders to
avoid humidity to get inside.
