Oven function
Application
Defrost
To defrost food (vegetables
and fruit). The defrosting
time depends on the
amount and size of the fro-
zen food.
Pyrolysis
To turn on the pyrolytic
cleaning of the oven. This
function burns off residual
dirt in the oven.
SETTING A HEATING FUNCTION
1. Turn the knob for the heating functions to
select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven operates.
3. To turn off the oven, turn the knob for the
heating functions to the off position.
HEAT-UP INDICATOR
When the oven function operates, the bars in the
display appear one by one when the
temperature in the oven increases, and disappear
when it decreases.
CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function
Application
TIME OF DAY
To show or change the time
of day. You can change the
time of day only when the
oven is off.
DURATION
To set how long the oven
works. Use only when a
heating function is set.
END
To set when the oven turns
off. Use only when a heat-
ing function is set.
TIME DELAY
Combination of DURATION
and END function.
MINUTE
MINDER
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is off.
00:00
COUNT UP
TIMER
If you do not set any other
clock function the COUNT
UP TIMER automatically
monitor how long the oven
works.
It is on immediately when
the oven starts to heat.
The Count Up Timer cannot
be used with the functions:
DURATION, END.
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows
and "12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and set the minutes.
The display shows
and the set hour. "00"
flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of day will
be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press again and
again until the indicator for the time of day
flashes in the display.
SETTING THE DURATION FUNCTION
1. Set a heating function.
2. Press again and again until
starts to
flash.
3. Press or to set the minutes and then the
hours. Press to confirm.
When the set Duration time ends the signal sounds
for 2 minutes.
and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knob for the heating functions to the
off position.
SETTING THE END FUNCTION
1. Set a heating function.
8
