Problem
Possible cause
Remedy
The display shows "F102".
• You did not fully close the
door.
• The door lock is defective.
• Fully close the door.
• Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows "F102"
again, contact the Custom-
er Care Department.
The display shows an error
code that is not in this table.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
The demo mode is activated.
1. Deactivate the oven.
2. Press and hold the button
.
3. When an acoustic signal
sounds, turn the knob for
the oven functions clock-
wise to the first function.
"Demo" flashes in the dis-
play.
4. Turn the knob for the oven
functions to the off posi-
tion.
5. Release the button .
6. Turn the knob for the tem-
perature clockwise and
hold it for three seconds.
The acoustic signal
sounds three times. The
demo mode is deactivated.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
22
Downloaded from www.vandenborre.be