electrolux
9
9
Electronic programmer
4
5
1
2
3
6
7
8
1. Push button for selecting a function
2. Decreasing control button “ ”
3. Increasing control button “ ”
4. Display
5. “Cooking Duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute minder” pilot lamp
8. “Time of day” pilot lamp
The oven will only work if the time of
day has been set.
However, the oven can also be operated
without any programme.
In the event of a power failure, all the
settings (time of day, programme setting or
programme in operation) will be cancelled.
When the power is restored, the numbers in
the display will flash, and the clock/timer
has to be reset.
Setting the time of day
When the power supply is switched on, or after
a power failure, the “Time of day” pilot lamp will
flash on the display.
To set the correct time of day:
1.
Press button “ ” or “ ”.
2.
After the setting is carried out, wait for 5 se-
conds: the “Time of day” pilot lamp will go
out and the display will show the set time. The
appliance is ready for use.
To reset the correct time of day:
1.
Press button
repeatedly to select the
“Time of day” function. The relevant pilot lamp
will start flashing. Then proceed as described
above.
The time of day can only be reset if no
automatic function (cooking duration
or
end of cooking
) has been set.
Downloaded from www.vandenborre.be
