Zanussi ZKT 863 LX, Инструкция по установке и эксплуатации

Страница: 20 / 36

20
The automatic warm up
function is not switch-
ing itself on There is still residual
heat on the cooking
zone
h
Let the cooking zone
cool down
The highest heat set-
ting is set
Ç
The highest heat set-
ting has the same pow-
er as the automatic
warm up function
The heat setting was
set using the sensor
field
1.
Switching off the
cooking zone
1.
Set the cooking zone
using the sensor field
Acoustic signal sounds
and appliance switch-
es itself on and then off
again; after 5 seconds
another acoustic signal
sounds The On/Off sensor field
has been covered up,
e.g. by a cloth Do not place any ob-
jects on the control
panel
_
is lit Overheating protection
for the cooking zone
has been triggered Switch off the cooking
zone. Switch the cook-
ing zone on again
Safety cut-out has
been triggered Switch off the cooking
zone. Switch the cook-
ing zone on again
Problem Possible cause Remedy