Zanussi ZKT 863 LX, Инструкция по установке и эксплуатации

Страница: 19 / 36

19
What to do if
…
Problem Possible cause Remedy
The cooking zones will
not switch on or are not
functioning More than 10 seconds
have passed since the
appliance was
switched on Switch the appliance
on again.
The child safety device
is switched on
l
Deactivate the child
safety device (See the
section “Child safety
device”)
Several sensor fields
were touched at the
same time Only touch one sensor
field
Safety cut-out has
been triggered Remove any objects
(pan, cloths, etc.) that
are lying on the control
panel. Switch the appli-
ance on again
The lock is switched on
l
Switch off the lock (See
the section “Locking/
unlocking the control
panel”)
Acoustic signal sounds
when appliance is
switched off The control panel is
wholly or partly covered
by objects. Remove objects.
The residual heat indi-
cator is not displaying
anything
The cooking zone was
only on for a short time
and is therefore not hot
If the cooking zone is
supposed to be hot,
call your local Service
Force Centre.