Zanussi ZKT 621 LX Скачать руководство пользователя страница 19

Страница: 19 / 22

With regard to the protection against overheating

of surrounding furniture surfaces this appliance

corresponds to type Y. This appliance or the built--

in cupboard for the appliance respectively may be

located with the rear wall and one side wall to wha-

tever high walls or furniture respectively and with

the other side to another appliance or furniture of

the same height as this appliance.

Hob installation

Cut out the worktop with the cut--out size as sta-

ted. The toleranced sizes must not be exceeded..

Saw exactly at the marking line. Recommenda-

tion: Mark the cut--out with a steel needle.Cover--

glue the line in order to avoid splintering of the

coating when cutting.

Clean the worktop in the cut--out section

With tiled worktops the grooves within the contact

area of the cooking area must completely be filled

up with groove material.

Then fasten the catch springs with screws in the

cut--out at the marked position. The distortion of

the springs serves as a stop on the worktop.

With natural, artificial stone, or ceramic plates the

springs can be glued in with special adhesive

(synthetic resin, two--component adhesive, etc.)

The cooking area is entered from the top into the

cut--out section, centered and firmly pressed on

until the springs will catch.

Check the seal in the supporting frame for perfect

seating and gapless support. Please do not apply

further silicone sealing matter as this will compli-

cate the removal of the hob if servicing is neces-

sary.

sealing

frame

ceramic glass plate

snap--in clamp

worktop

Содержание ZKT 621 LX























Результаты поиска

Содержание ZKT 621 LX

Отзывы:

Похожие инструкции для ZKT 621 LX

Бренды по названию

Популярные бренды

Zanussi ZKT 621 LX, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание ZKT 621 LX

Отзывы:

Похожие инструкции для ZKT 621 LX

Бренды по названию

Популярные бренды