5
Changing the opening direction
of the doors
Fig. 7
Fig. 8
If you wish to change the opening side of the
doors proceed as follows:
1... Open the freezer door. All the appliances have
a ventilation socle at the bottom. Remove it
pushing strongly on the central and upper
part. The upper supports will be loosed takes
the piece out. Then, take the hinge cover off
the opposite side of the ventilation cover and
place it as required. (see fig. 7).
2... Removing the central hinge:
Open both doors.
Remove the external pin and then close the
freezer door.
Remove the other pin and close the fridge
door.
Taking care the doors do not fall, pull them
off till bolts are loose.
Put the doors carefully on the floor.
3... Swap the hinge and the corner cupboard and
change the lower hinge pin and the screw
cover of the centre transom to the other side.
4... Change the door self-closing system, putting
the freezer doors on the fridge door and vice-
versa.
5... Fit the freezer door into the lower hinge bolt
and put the central hinge into the door.
6... Fit the fridge door into the upper hinge bolt.
Pulling both doors outwards, fit the central
hinge bolt too. Place the doors.
7... Open the fridge door and screw the central
hinge pin. Then, open the freezer door and
screw the other pin.
8... Assemble socle keep the door open, close it
up to the metallic part.
Fit the two lower flaps of the plastic piece into
the metallic one, press down wards the two
upper hooks (without stopping pressing the
socle).
Push it to wards the metallic one till they fit
perfectly.
Once finished make sure that all joints close
perfectly well all around the door and check
that the internal light turns off when the fridge
door closes. (see Fig. 8)
