background image

6

Regulation and Control

I Freezer control knob

Setting the knob at 1 will give you a minimum fre-

ezing temperature. Setting 7 will give you the

maximum freezing temperature. For normal use

set the freezer at a middle setting (The exact set-

ting will depend on your usage of the freezer).

2 The door alarm

If either of the doors is left open for a prolonged

period of time the door alarm will start to beeb and

a red flashing light will go on. Pressing the alarm

button will switch the buzzer off and the light will

stop flashing, but remain red. If you simply shut

the doors, this will also switch off the door alarm

buzzer and the light automatically.

3 Temperature alarm

If the internal temperature has risen significantly

the temperature alarm will sound and the light will

start to flash. To switch the alarm off simply press

the temperature alarm button. This will stop the

buzzer and the red light will stop blinking and

remain red.

The temperature alarm may go on because:

a.- The doors have been left open.

b.- There has been a power failure.

c.- More than the recomended amount of food has

been put in at one time.

d.- You need to set the temperature controls to a

colder position.

If the alarm goes on constantly you should contact

you THECNICAL OFICIAL SERVICE.

4 Fast Freeze

This feature is designed to help you freeze

your food more quickly. It is best to press the

fast freeze button before going shopping (pre-

ferably 3 houres in advance) in order to have

the freezer in an optimal state to put your food

in. If you haven’t pressed the button prior to

purchasing your food you can of course put

your new purchases in, but it will take longer

for the freezer to cool down. (If you put a lot of

fresh food into your freezer you could cause

the temperature alarm to go on. For further

information see sention on temperature

alarm).

5 On/Off button 

To make the product work press the ON/OFF

button continuosly for 3 seconds. To switch the

product off press the button continuously for 3

seconds. When the product has been plugged

in and the button pressed for the 3 seconds,

the button will light up in green. If the ON/OFF

button is green the freezer knob and fridge

knob will also be lit up.

6 Fridge control

Setting the knob to the standby position when

the freezer is working, but the fridge if not

being used, (for example when you go on holi-

day), will help you to reduce energy consump-

tion. The fridge door however must be kept

closed.

By turning the knob clockwise you will pro-

gressively cool down the fridge. Position 5 is

the coldest setting possible.

If neither the fridge nor the freezer are being

used (i.e. The appliance switched off), both

doors should be left open. This will help to

avoid any possible smells caused by high

levels of humidity.

Содержание ZKN20
















Отзывы: