background image

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisable to

treat them prior to washing.

Blood:

treat fresh stains with cold water. For

dried stains, soak overnight in water with a

special detergent then rub in the soap and

water.

Oil based paint:

moisten with benzine stain

remover, lay the garment on a soft cloth and

dab the stain; treat several times.

Dried grease stains:

moisten with turpentine,

lay the garment on a soft surface and dab the

stain with the fingertips and a cotton cloth.

Rust:

oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since the

cellulose structure will already have been

damaged and the fabric tends to hole.

Mould stains:

treat with bleach, rinse well

(whites and fast coloureds only).

Grass:

soap lightly and treat with bleach

(whites and fast coloureds only).

Ball point pen and glue:

moisten with

acetone (*), lay the garment on a soft cloth and

dab the stain.

Lipstick:

moisten with acetone as above, then

treat stains with methylated spirits. Remove

any residual marks from white fabrics with

bleach.

Red wine:

soak in water and detergent, rinse

and treat with acetic or citric acid, then rinse.

Treat any residual marks with bleach.

Ink:

depending on the type of ink, moisten the

fabric first with acetone (*), then with acetic

acid; treat any residual marks on white fabrics

with bleach and then rinse thoroughly.

Tar stains:

first treat with stain remover,

methylated spirits or benzine, then rub with

detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the

environment. Although biodegradable,

detergents contain substances which, in large

To avoid a static charge when drying is com-

pleted, use either a fabric softener when you

are washing the laundry or a fabric conditioner

specifically for tumble dryers.
Particularly delicate items such as synthetic

curtains, woollen and silk,  garments with metal

inserts, nylon stockings, bulky garments such

as anoraks, bedcovers, quilts, sleeping bags

and duvets must not be machine dried.
Garments padded with foam-rubber or materi-

als similar to foam-rubber must not be machine

dried; they represent a fire hazard.
Also, fabrics containing residues of setting

lotions or hair sprays, nail solvents or similar

solutions must not be machine dried in order to

avoid the formation of harmful vapours.
For drying, follow the indications given on the

manufacturer’s labels.

For drying, follow the indications given on the

manufacturer’s labels.

May be tumble dried
Drying at high temperature
Drying at reduced temperature
Do not tumble dry

IMPORTANT!

As a dryer, the machine works on the

condensation principle.

Therefore, the water tap must be open and

the drain hose must drain water into a sink

or into the drain pipe, even during the dry-

ing cycle.

Maximum loads

Recommended loads are indicated in the

programme charts. General rules:

Cotton, linen:

drum full but not too tightly

packed;

Synthetics:

drum no more than half full;

Delicate fabrics and woollens:

drum no more

than one third full.

Washing a maximum load makes the most

efficient use of water and energy. For heavily

soiled laundry, reduce the load size.

10

Содержание ZKI245

































Отзывы: