Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Level
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
< 4
< 7
< 0.7
< 5
1
2)
1)
Factory position.
2)
Do not use salt at this level.
How to adjust the level of the water
softener
1. Press the on/off button to activate the ap-
pliance. Make sure that the appliance is in
setting mode, refer to “Setting and starting
a programme”.
2. Press and hold, at the same time
and
until the
,
and
indicators
start to flash.
3. Press button
.
• The indicators of buttons
and
go off.
• The indicator of button
continues to
flash.
• The display shows the current setting of
the water softener, e.g.
= level 5.
4. Press button
again and again to
change the setting.
5. Press the on/off button to deactivate the
appliance and to confirm the setting.
Filling the salt container
Caution!
Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent it, after you fill
the salt container, start a programme.
1
2
3
Put 1 litre of water in
the salt container
(only for the first
time).
4
20
www.zanussi.com
Содержание ZDT16017FA
Страница 56: ...www zanussi com shop 156973130 A 432013 ...
