6. "Economy drying" pushbutton
By pressing this pushbutton you can opt to
shorten or completely eliminate the hot air drying
cycle, so making a considerable energy saving.
Eco drying
No drying
The indicator light corresponding to the selection
will come on.
With the programme 1 (Rinse and hold) the
drying options are not available.
If both indicator lights are out, the full drying
cycle will be carried out.
7. "Delay start" pushbutton
Allows the start of the programme to be delayed
by a minimum of 1 hour, up to 12 hours.
8. Digital display
9. "Programme start" pushbutton
This is the last pushbutton to be pressed after
setting the wash programme and, if required,
drying options, half load, delay start.
10. Programme phase indicator
lights
Each phase is indicated with a symbol:
Prewash/Rinse and Hold
Wash
Rinse
Hot air drying
As soon as you select a washing programme, this
illuminates all the phases the programme
consists of.
As the programme progresses, the phase under
way will illuminate.
At the end of the programme the phase indicator
lights turn off.
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short "instruction accepted" signal
When any of the pushbuttons are pressed, a
short audible signal informs you that the machine
has accepted the instruction given.
Long "programme run" signal
A continuous audible signal informs you that the
washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the
wash programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm
systems to help you determine the cause of any
problems (see "Something not working"). An
intermittent audible signal informs you that an
alarm is activated.
To deactivate these audible signals, press both
"half load" and "delay start" pushbuttons, after
about 3 seconds 3 short intermittent audible
signals inform you that the audible signals have
been deactivated.
To reactivate these audible signals, press both
"half load" and "delay start" pushbuttons, after
about 3 seconds 3 short intermittent audible
signals inform you that the audible signals have
been activated.
It is possible to deactivate or reactivate the
audible signals only before starting a wash
programme, the setting will remain
memorised after switching off the dishwasher.
34
PCP73GB
SO261