1. On/Off indicator light
This comes on when the On/Off pushbutton is
depressed, indicating that the machine is on.
2. On/Off pushbutton
Press this pushbutton to preset the dishwasher to
accept settings (selection of a wash programme,
economy drying, delay start etc.).
To switch off the machine at the end of the
programme or to stop it at any time, press the
On/Off pushbutton.
3. Indicator lights
Open door
illuminates when the door has not been
properly closed.
Salt
illuminates when the salt has run out, to
remind you to refill the salt container.
Water tap
Flashes when:
- The water tap is closed.
- The mains water supply has been cut off.
- The inlet hose may be blocked.
Rinse aid
illuminates when the rinse aid has run out, to
remind you to refill the rinse aid dispenser.
4. "Programme selector"
pushbutton
To select the required programme press this
pushbutton until the number corresponding to the
chosen programme appears in the digital display
(see chart "Washing programmes").
All the indicator lights of the phases
corresponding to the selected programme will
come on.
5. "Half load" pushbutton
By pressing this pushbutton, washing can be
confined to a single basket instead of both.
The indicator light corresponding to the basket
selected comes on.
Upper basket
Lower basket
This is very useful and economical when only a
few dishes need washing.
Remember to load all the dishes into the basket
selected.
If both indicator lights are out, washing will be
carried out in both baskets.
If programme 1 (Rinse and hold) and programme
10 (Plate warmer) are selected this option is not
available.
The control panel
33
PCP72GB
1
2
3
4
5
6
7
8
9
10
