Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to
31 cm in diameter) you can load them in the lower
basket after moving the upper basket.
Never lift or lower the basket on one side only.
To move to the higher position proceed as
follows:
1.
Pull out the basket until it stops.
2.
Carefully lift both sides upwards until the
mechanism is engaged and the basket is
stable.
When the top basket is in the higher position
it will only take plates up to 20 cm in diameter
and you will not be able to use the raised cup
racks.
To lower the basket to the original position:
1.
Pull out the basket until it stops.
2.
Carefully lift both sides upwards and then allow
the mechanism to drop back down slowly,
keeping hold of it.
After loading your machine always close
the door, as an open door can be a
hazard.
39
PBA12GB
RC02
Содержание ZDS 679 EX
Страница 28: ...0 05 98 ...