Zanussi ZDI15001, Руководство пользователя

Страница: 12 / 32

Alarm code Problem
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 1 time intermittently.
The appliance does not fill with water.
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 2 times intermittently.
The appliance does not drain the water.
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 3 times intermittently.
The anti-flood device is on.
Warning! Deactivate the appliance before
you do the checks.
Problem Possible cause Possible solution
The programme does not
start. The mains plug is not connected in
the mains socket. Connect the mains plug.
The appliance door is open. Close the appliance door.
The fuse in the fuse box is damaged. Replace the fuse.
The delay start is set. Cancel the delay start or wait for the
end of the countdown.
The appliance does not fill
with water. The water tap is closed. Open the water tap.
The water pressure is too low. Contact your local water authority.
The water tap is clogged or there is
limescale on it. Clean the water tap.
The filter in the water inlet hose is
clogged. Clean the filter.
The water inlet hose has a kink or a
bend. Make sure that the position of the
hose is correct.
The anti-flood device is on. There are
water leakages in the appliance. Close the water tap and contact the
Service.
The appliance does not
drain the water. The sink spigot is clogged. Clean the sink spigot.
The water drain hose has a kink or a
bend. Make sure that the position of the
hose is correct.
After the checks are completed, activate the
appliance. The programme continues from the
point of interruption.
If the problem occurs again, contact the Serv-
ice. If the display shows other alarm codes, contact
the Service.
12
www.zanussi.com