33
To change a programme after the start of
the "delay start"
If you want to change the selected washing programme
after the start of the delay start you have to reset the
dishwasher by cancelling the previous setting (also the
setting of the delay start will be lost).
Press simultaneously the function push buttons 2 and
3 for about 2 seconds, the indicator lights of the
programme selection push buttons start flashing for
about 2 seconds. After about 2 seconds the indicator
lights of the programme selection push buttons will
illuminate and in the digital display will appear 2
horizontal lines indicating that the running programme
has been cancelled and that the machine has returned to
setting mode.
It is now possible to set a new washing programme.
8. End of the washing programme
The dishwasher will automatically stop and 3 intermittent
audible signals of about 15 seconds each, alternated one
from another with a pause of 3 minutes, inform you of the
end of the washing programme.
The end of programme indicator light is illuminated.
In the digital display appears 0 (remaining programme
time), only in this case switch off the dishwasher.
Switch off the dishwasher by pressing the On/Off push
button.
Hot steam may escape from the appliance when opening
the door immediately after the end of the programme,
therefore, open the door carefully.
Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Leave the dishes in the dishwasher for approx. 15
minutes, with the door ajar, after the end of programme
so that they dry better and will be cooler.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
