32
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off push button
The On/Off indicator light illuminates.
The indicator lights of programme selection push buttons
illuminate and in the digital display are visible 2 horizontal
lines (setting mode)
5. Setting and starting the programme
To select a programme, press indifferently one of the two
programme selection push buttons, the indicator lights of
the programme selection push buttons start to flash and
in the digital display will appear the number corresponding
to the last performed washing programme set.
Using these two push buttons you have a growing
(+) or a decreasing (-) order in the selection of the
programme. (See "Washing programmes" chart for the
number of the programme).
Example:
push button
(growing order): 1P
→
2P
→
3P etc...
push button
(decreasing order): 1P
→
6P
→
5P etc...
The number of the programme flashes in the digital
display.
The start of the programme will occur about 3 seconds
after having selected the programme.
Select if desired, within 3 seconds, the "half load" option
(if foreseen with the programme). The corresponding
indicator light illuminates.
After about 3 seconds from the last pressure of a push
button the programme starts automatically.
In the digital display appears the running time of the
programme and the indicator lights of the programme
selection push buttons remain illuminated with a static
light.
6. To interrupt, change or cancel a
washing programme
Interrupt, change or cancel a washing programme in
progress ONLY if it’s absolutely necessary
To interrupt a washing programme
Attention! Hot steam may escape when the door is
opened. There is risk of scalding. Open the door
carefully.
●
Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point in which it was interrupted.
●
pressing the On/Off (in this case all the indicator
lights turn off). Press the On/Off push button again;
the programme will start from the point in which it was
interrupted.
To change a washing programme
●
If you want to change the washing programme within
the 3 seconds before the start of the programme,
simply press the programme selection push buttons
until the number of the new programme appears in
the digital display.
●
If you want to change a washing programme in
progress you have to reset the dishwasher by
cancelling the running programme (see "To cancel a
washing programme").
To cancel a washing programme in progress
●
Press simultaneously the function push buttons 2 and
3 for about 2 seconds, the indicator lights of the
programme selection push buttons start flashing for
about 2 seconds. After about 2 seconds the indicator
lights of the programme selection push buttons will
illuminate with a static light and in the digital display
will appear 2 horizontal lines indicating that the
running programme has been cancelled and that the
machine has returned to setting mode.
It is now possible to select and start a new washing
programme.
7. Setting the "delay start"
The setting of the delay start occurs before selecting
the programme.
Setting the "delay start"
●
Press the On/Off push button.
●
Press the delay start push button until the flashing
number of the hours for the delay start appear in the
digital display.
●
Press one of the programme selection push buttons
and within 3 seconds select a washing programme.
In the digital display will appear for a moment the
running time of the programme and then will appear
the selected starting time again.
●
As soon as the number of hours is displayed without
flashing, the countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
●
The opening of the door during the countdown will not
modify the delay start.
●
Once the delay start has elapsed the programme will
start automatically.
To change the "delay start"
As long as the washing programme has not started, you
can change the number of hours for the delay start by
pressing the "delay start" push button.
To cancel the "delay start"
As long as the washing programme has not yet started,
you can cancel the delay start set by pressing the
"delay start" push button until in the digital display
appears the time duration of the selected programme.
The washing programme will start immediately.
Starting a washing programme