background image

Problem

Possible cause

Possible solution

The appliance does not drain

the water.

The sink spigot is clogged.

Clean the sink spigot.

 

The water drain hose has a kink or a

bend.

Make sure that the position of the hose is

correct.

After the checks are completed, activate the appliance. The

programme continues from the point of interruption.

If the problem occurs again, contact the Service.

If the display shows other alarm codes, contact the Serv-

ice.

The washing results and drying results are not satisfactory

Problem

Possible cause

Possible solution

The dishes are not clean.

The filters are clogged.

Clean the filters.

 

The filters are not correctly assembled

and installed.

Make sure that the filters are correctly as-

sembled and installed.

 

The spray arms are clogged.

Remove remaining soil with a thin pointed

object.

 

The programme was not applicable for

the type of load and soil.

Make sure that the programme is applica-

ble for the type of load and soil.

 

Incorrect position of the items in the

baskets. Water could not wash all items.

Make sure that the position of the items in

the baskets is correct and that the water

can easily wash all items.

 

The spray arms could not turn freely.

Make sure that the position of the items in

the baskets is correct and does not cause

the blockage of the spray arms.

 

The quantity of detergent was not suffi-

cient.

Make sure that you add the correct quan-

tity of detergent in the dispenser before

you start a programme.

 

There was no detergent in the detergent

dispenser.

Make sure that you add detergent in the

dispenser before you start a programme.

Limescale particles on the

dishes.

The salt container is empty.

Make sure that there is dishwasher salt in

the salt container.

 

The set level of the water softener is in-

correct.

Make sure that the set level of the water

softener agrees with the water hardness in

your area.

 

The cap of the salt container is loose.

Tighten the cap.

Whitish streaks and stains or

bluish layers on glasses and

dishes.

The released quantity of rinse aid is too

much.

Decrease the released quantity of rinse aid

.

12

 

www.zanussi.com

Содержание ZDF4013

















Отзывы: