background image

Using the detergent

Caution! Use only detergents for dishwashers.
Do not use more than the correct quantity of deter-

gent. Refer to the instructions on the detergent

packaging.

1

2

A

3

Put the detergent or the

tablet in compartment (A).

A

B

If the programme has a

prewash phase, put a

small quantity of detergent

in compartment (B).

4

Detergent tablets do not fully dissolve with short

programmes and detergent residues can stay on the

dishes.

We recommend that you use detergent tablets with long

programmes.

Setting and starting a programme

Setting mode
The appliance must be in setting mode to accept some

operations.

The appliance is in setting mode when, after the activa-

tion:
• All the programme indicators come on.

If the control panel shows other conditions, press and

hold function buttons (B) and (C) at the same time until

the appliance is in setting mode.

Starting a programme without delay start
1. Open the water tap.
2. To set a programme, keep the appliance door ajar.
3. Press the on/off button to activate the appliance.
4. Make sure that the appliance is in setting mode.
5. Press the button of the programme you want to set.

• The programme duration flashes in the display.
• The related programme indicator comes on.
• The wash indicator comes on.

6. Close the appliance door. The programme starts.

• The display shows the programme duration that

decreases with steps of 1 minute.

• The wash indicator stays on.

Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again until the dis-

play shows the delay time you want to set (from 1 to

19 hours).
• The delay time flashes in the display.
• The delay indicator comes on.

3. Close the appliance door. The countdown starts.

• The display shows the countdown of the delay

start that decreases with steps of 1 hour.

• The wash indicator goes off.

• When the countdown is completed, the programme

starts.
– The delay indicator goes off.
– The wash indicator comes on.
– The display shows the programme duration.

 

9

www.zanussi.com

Содержание ZDF4013

















Отзывы: