Zanussi ZDF26011XA, Руководство пользователя

Страница: 26 / 56

THE WATER HARDNESS TABLE
German degrees
(°dH)
French degrees
(°fH)
mmol/l Clarke degrees
Water softener
level
47 -50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1) Factory setting
2) Do not use salt at this level.
ADJUSTING THE WATER SOFTENER
While the appliance is in user mode:
1. Press
.
• The indicators and are off.
• The indicator continues to flash.
• The display shows the current setting: e.g. = level 5.
2. Press to change the setting. Each time you press the button, the level increases. After level
10 you will start again from level 1.
3. Press the on/off button to confirm the setting.
If you use multi-tablets containing salt and the hardness of your water is lower than 21°dH,
you can set the lowest water softener level. It deactivates the salt refill indicator.
If you use standard detergent or multitablets without salt, set the proper water hardness level
to keep the salt refill indicator active.
26