Zanussi Z 9060 XOS Скачать руководство пользователя

Страница: 2 / 36

Dear Customer,

We thank you very much for choosing our products.
The instructions and advice included in this booklet are given

to safeguard your safety and to use this appliance correctly.

Be so kind as to keep this booklet.
It will be useful to clear any doubt concerning its operation.
This appliance must be only assigned to the use for which it

has been realized, that is for cooking food.

Any other use has to be considered incorrect and therefore

dangerous.

The manufacturer declines any liability for damages

caused by wrong, incorrect or irrational use of the appliance.

Read the instructions carefully before installing and using the appliance.

CAUTION: this apparatus must only be installed in a permanently ventilated room in
compliance with the applicable regulations.

IMPORTANT INSTRUCTIONS AND ADVICE FOR THE USE OF ELECTRICAL

APPLIANCES

The use of any electrical appliance requires the compliance with some basic rules,
namely:

– do not touch the appliance with wet or damp hands (or feet)

– do not use the appliance whilst in bare feet

– do not allow the appliance to be operated by children or unqualified persons without

supervision.

The manufacturer cannot be deemed responsible for damages caused by wrong or
incorrect use.

Содержание Z 9060 XOS





































Результаты поиска

Содержание Z 9060 XOS

Отзывы:

Похожие инструкции для Z 9060 XOS

Бренды по названию

Популярные бренды

Zanussi Z 9060 XOS, Инструкция по использованию и монтажу

Результаты поиска

Содержание Z 9060 XOS

Отзывы:

Похожие инструкции для Z 9060 XOS

Бренды по названию

Популярные бренды