Zanussi FI 4590 T, Инструкция пользователя

Страница: 6 / 10

6
Position the two runners (H) at the top and bottom
of the inside of the kitchen unit as shown in Fig. 6
and mark the position of the external holes.
After preparing the holes, screw the runners to the
kitchen unit door using 3.5x16 mm screws.
Fig. 6
Open both the appliance door and that of the
kitchen unit to approx. 90
°
.
Place the little plates over the runners. Hold the
doors of the appliance and the unit together and
mark the holes.
Fig. 7
D094
20mm
H
8mm
PR34
Remove the little plates and make the holes with a
diam. of 2 mm. Replace the little plates over the
runners and screw in the screws provided (3.5x16
mm).
For the alignment of the kitchen unit door, if
necessary, use the clearance size of the slotted
holes.
At the end of the procedure, check that the doors of
the appliance and the kitchen unit open properly.
Fig. 8
PR35