Zanussi FI 4590 T, Инструкция пользователя

Страница: 4 / 10

4
INSTALLATION
If this model, equipped with a magnetic door lock,
replaces an old appliance with a catch, ensure that
the latter cannot be used before discarding it to
prevent children being trapped inside.
Positioning
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc.; best performance is obtained with
ambient temperature b18
°
C and +38
°
C.
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply. Voltage
can vary by
±
6% of the rated voltage. For operation
with different voltages, a suitably sized auto-
transformer must be used.
The appliance must be earthed.
The power supply cable plug is provided with a
contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance
to a separate earth in compliance with current
regulations, consulting a specialist technician.
The Manufacturer declines all responsibility if the
above safety precautions are not observed.
This appliance complies with EEC directive
number 87/308 of 2/6/87 relative to radio
interference suppression.
This appliance complies with the following
E.E.C. Directives:
-
73/23 EEC
of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Cleaning the inside
Before using, clean all inside parts with warm water
and neutral soap to remove the typical new smell.
Dry thoroughly. Do not use abrasive detergent or
powders as these can damage the finish.