31
ENGLISH
USE
Control panel
1
2
3
4
5
6
7
1 Detergent dispenser drawer
2 Operating pilot light
This light is on whilst the machine is operating
and goes out at the end of the programme.
3 START/STOP button
Press this button to start the machine: the «pilot»
light will come on. The same button is used to
switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the same button.
4 Spin speed reduction button
By depressing this button the spin speed is
reduced as follows:
- from 800 to 400 rpm and from 1000 to
600 rpm (according to the model) in the
programmes for cotton and linen
- from 750 to 400 rpm in the programmes for
synthetics, delicates and wool.
5 Rinse hold (anti-crease) button
Press this button to make the machine stop with
water in the drum after the synthetic or delicate
wash cycles.
This prevents any creasing which may take place
if the clothes are left damp in the drum. When it
is convenient for you to empty the machine,
simply press this button again so that the
machine can proceed to drain and spin, or turn
the dial to the drain programme “Q”.
If the button has not been depressed, the
programme will end with a short spin.
6 Temperature selector dial
Turn this dial to select the washing temperature.
Position
= cold wash.
Depress the dial to pop it out.
7 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
Depress the dial to pop it out.
