27
Cleaning and Maintenance
For hygienic reasons the appliance interior, including
interior accessories, should be cleaned regularly.
1
Warning!
•
The appliance may not be connected to the mains
during cleaning. Danger of electrical shock!
Before cleaning switch the appliance off and
remove the plug from the mains, or switch off or
turn out the circuit breaker or fuse.
•
Never clean the appliance with a steam cleaner.
Moisture could accumulate in electrical compo-
nents, danger of electrical shock! Hot vapours can
lead to the damage of plastic parts.
•
The appliance must be dry before it is placed back
into service.
Attention!
•
Ethereal oils and organic solvents can attack plas-
tic parts, e.g.
– lemon juice or the juice from orange peals;
– butyric acid;
– cleansers which contain acetic acid.
Do not allow such substances to come into
contact with appliance parts.
•
Do not use any abrasive cleansers.
1. Remove food from the refrigerator. Wrap food in
several layers of newspaper. Store it in a cool
place, well covered.
2. Switch the appliance off and remove the plug from
the mains, or switch off or turn out the circuit
breaker or fuse.
3. Clean the appliance and the interior accessories
with a cloth and lukewarm water. Commercially
available dish washing detergents may also be
used.
4. After cleaning wipe with fresh water and rub dry.
5. Regularly unblock the condensation water drain-
age hole in the rear wall of the refrigeration cham-
ber with the aid of the green strip inserted into the
drainage hole.
6. After everything is dry place appliance back into
service.
2
Energy Saving Tips
•
Do not install the appliance near cookers, radia-
tors or other sources of warmth. High ambient
temperatures cause longer, more frequent opera-
tion of the compressor.
•
Ensure sufficient air circulation and exhaust at the
appliance base and at the back wall of the appli-
ance. Never cover air vent openings.
•
Do not place warm foods into the appliance. Allow
warm foods to cool first.
•
Only leave door open as long as necessary.
•
Do not set temperature any colder than neces-
sary.
