77
The SPECIALS/ANNULL. button is then used to
cancel or advance the programme to the required
phase.
The SPECIALS/ANNULL. button can only operate
when the programme is in pause.
A normal wash cycle consists of the following
phases, Wash - Rinses - Spin and is confirmed by
the illumination of the corresponding LED,s.
To select rinses & spin, the programme must be
paused, now press the SPECIALS/ANNULL. button
once, the wash LED goes out.
To select spin only, the programme must be
paused, now press the SPECIALS/ANNULL. button
twice.
The wash & rinses LED,s go out.
To select Drain the programme must be
paused,
now press the SPECIALS/ANNULL. button three
times, the wash - rinses - spin LED,s go out.
PREWASH
WASH
SPIN
RINSES
DRAIN
PREWASH
WASH
SPIN
RINSES
DRAIN
PREWASH
WASH
SPIN
RINSES
DRAIN
PREWASH
WASH
SPIN
RINSES
DRAIN
11 DELAY button
This button makes it possible to delay the starting of
the programme by 30, 60, 90 minutes then 2 hours
up to 23 hours. The delay you have selected is
shown on the display for about 3 seconds;
afterwards, the duration of the programme
reappears.
If the button
(soak) has been pressed the
selected delay (10 hours max.) will correspond to the
soak time. If no delay time is selected the soak
programme will last about 30 minutes.
You must select this option after you have set the
programme and before you press the
START/PAUSE button.
The time value shown on the display will decrease
by one unit every hour.
You can change the delay time at any moment,
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE
button, and you wish cancel the delay time, proceed
as follows:
• set the washing machine to PAUSE by pressing
the START/PAUSE button;
• press the DELAY button repeatedly, to erase the
delay time. The display will indicate “
0’
”.
• press the START/PAUSE button again.
To change the delay time, after the programme had
started, set the programme and the delay time
again.
Important!
The door will be locked throughout the delay time
(DOOR LOCKED light lit).
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the door,
press the START/PAUSE button again.
12 Programme phase indicator lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
1329898690GB.qxd 04/05/2004 16:10 Pagina 77 (Nero/Process Black pellicola)