72
ENGLISH
9. Cancelling a programme
Turn the selector dial to
O
to cancel a programme
which is running.
Now you can select a new programme.
10. Opening the door after the
programme has started
First set the machine to PAUSE by pressing the
START/PAUSE button.
The door can be opened when the DOOR light has
gone out.
If the door does not open, this means that the water
temperature is above 55°C, that the water level is
above the bottom edge of the door or that the drum
is turning.
If you cannot open the door but you need to open it
you have to switch the machine off by turning the
programme selector dial to “
O
”. After about 3
minutes the door can be opened (pay attention to
the water level and temperature!).
Select the programme again and depress
START/PAUSE to restart it.
11. At the end of the programme
The machine stops automatically.
If the anti-crease
option has been selected, the
door is locked and the END and DOOR lights remain
lit to indicate that the water must be emptied out
before opening the door.
To do this turn the programme selector dial to “
O
”
and then to programme
(drain) or
(spin). The
spin programme is performed at the maximum
speed. In order to avoid any creasing in synthetic,
delicate and wool items, the spin reduction option
must be selected.
The door can only be opened after the DOOR light
has gone out.
Release of the lock is also indicated by the coming
on of the END light.
Switch the machine off by turning the programme
selector dial to “
O
”.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
