66
ENGLISH
Use
Programme Option buttons
Depending on the programme, different functions
can be combined.
These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds.
1 “Options” button
Press this button to select the following options:
●
Rinse Hold
(anti-crease)
When selecting this option the water of the last
rinse is not emptied out, to prevent the fabrics
from creasing.
At the end of the programme the pilot lights
DOOR and END illuminate and the door is locked.
To drain water, proceed as follows:
turn the programme selector dial to position “O”;
select programme
(drain) or
(spin);
The spin programme is performed at the
maximum speed. In order to avoid any creasing
in synthetic, delicate and wool items, the spin
reduction option
must be selected.
press START/PAUSE button.
●
Spin speed reduction
The spin speed will be reduced as follows:
- cotton
F 1215
: from 1200 to 550 rpm
F 1415
: from 1400 to 650 rpm
- synthetics and wool
from 900 to 450 rpm
- delicates
from 700 to 450 rpm
2 “ QUICK” button
This button allows you to select the QUICK WASH
function, for laundry that is only slightly soiled (
not
for wool and economy programme 60E
).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. load for cotton 3 kg.
3 “PREWASH” button
Select this option if you wish your laundry to be
prewashed before the main wash (
not available for
wool
).
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
4 “
” button
The Extra Rinse option can be selected with all
programmes
except the wool programme
. The
machine will perform 2 additional rinses. This option
is recommended for people who are allergic to
detergents, and in areas where the water is very soft.
5 “Start/Pause” button
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remain lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted,
press the START/PAUSE button
again
.
1
2
3
4
5
6
7
QUICK
DOOR
END
OPTIONS
PREWASH
START
PAUSE
EXTRA
WASHING
PROGRAMS
F 1215
Control panel
