ZANOLLI SYNTHESIS 06/40V GAS, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 44

OPERATION
26 Synthesis 06/40V GAS
5.6.7
“FLAME”
If the gas control centre cannot detect a flame while the burner is on or being switched on, an
alarm is g
iven on the display through the flashing word “FLAME” (“FIAMMA”), accompanied by
the intermittent sound of the buzzer .The oven stops working.
Press the key to try and light the burner again.
In case of failure, the alarm sounds again.
The buzzer can be silenced by pressing the key .
If, after having pressed the reset button, the oven fails to turn on , check the gas connection
(for inst. if the valve on the feeding pipe is open) and that the flame detector is in contact with
the flame while lighting.
At the first ignition this alarm may often occur due to the presence of air in the feeding pipe.
Try lighting repeatedly until the air has left the pipe completely.
5.6.8 "BATTERY"
When the buffer battery installed on the main electronic board is exhausted, an alarm is
activated on the display together with the flashing writing "Battery" and the acoustic signal
plays in intermittent way. To replace the battery see paragraph 8.3.