ZANKER KDT10053FK, Руководство пользователя

Страница: 20 / 48

Problem and alarm code Possible cause and solution
The programme lasts too long. • If the delay start option is set, cancel the delay setting or wait for the end
of the countdown.
• Activating Extra power increases the programme duration.
Small leak from the appliance door. • The appliance is not levelled. Loosen or tighten the adjustable feet (if ap-
plicable).
• The appliance door is not centred on the tub. Adjust the rear foot (if appli-
cable).
The appliance door is difficult to
close. • The appliance is not levelled. Loosen or tighten the adjustable feet (if ap-
plicable).
• Parts of the tableware are protruding from the baskets.
The appliance door opens during
the wash cycle. • The AirDry function is activated. You can deactivate the function. Refer to
"Basic settings".
Rattling or knocking sounds from
the inside of the appliance.
• The tableware is not properly arranged in the baskets. Refer to basket
loading leaflet.
• Make sure that the spray arms can rotate freely.
The appliance trips the circuit-beak-
er. • The amperage is insufficient to supply simultaneously all the appliances in
use. Check the socket amperage and the capacity of the meter or turn off
one of the appliances in use.
• Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
Once you have checked the appliance, deactivate and
activate the appliance. If the problem occurs again,
contact an Authorised Service Centre.
For alarm codes not described in the table, contact an
Authorised Service Centre.
Warning! We do not recommend using
the appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
The dishwashing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results.
• Refer to "Daily use", "Hints and tips" and the basket loading leaflet.
• Use more intensive washing programme.
• Activate the Extra power option to improve the washing results of a se-
lected programme.
• Clean spray arm jets and filter. Refer to "Care and Cleaning".
Poor drying results. • Tableware was left for too long inside the closed appliance. Activate the
function AirDry to set the automatic opening of the door and to improve
the drying performance.
• There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the
rinse aid dispenser or set the dosage of rinse aid to a higher level.
• The quality of the rinse aid can be the cause.
• Always use rinse aid, even with multi-tablets.
• Plastic items may need to be towel dried.
• The programme does not have the drying phase. Refer to "Pro-
grammes overview".
20