ZANKER KDT10053FK, Руководство пользователя

Страница: 14 / 48

• To prevent limescale buildup inside the appliance:
– Refill the salt container whenever necessary.
– Use the recommended dosage of the detergent
and rinse aid.
– Make sure that the current level of the water
softener agrees with the hardness of the water
supply.
– Follow the instructions in the chapter "Care
and cleaning".
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent designed for
dishwasher. Other products can cause damage to
the appliance.
• In areas with hard and very hard water, we
recommend to use basic dishwasher detergent
(powder, gel, tablets containing no additional
agents), rinse aid and salt separately for optimal
cleaning and drying results.
• Detergent tablets do not fully dissolve with short
programmes. To prevent detergent residues on the
tableware, we recommend that you use tablets with
long programmes.
• Always use the correct quantity of detergent.
Insufficient dosage of detergent can result in poor
cleaning results and hard-water filming or spotting
on the items. Using too much detergent with soft or
softened water results in detergent residues on the
dishes. Adjust the amount of detergent based on the
water hardness. Refer to the instructions on the
detergent packaging.
• Always use the correct quantity of rinse aid.
Insufficient dosage of rinse aid decreases the drying
results. Using too much rinse aid results in bluish
layers on the items.
• Make sure that the water softener level is correct. If
the level is too high, the increased quantity of salt in
the water might result in rust on cutlery.
What to do if you want to stop using multi-tablets
Before you start using separately detergent, salt and
rinse aid, complete the following steps:
1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers are
full.
3. Start the 30min programme. Do not add detergent
and do not put dishes in the baskets.
4. When the programme is completed, adjust the
water softener according to the water hardness in
your area.
5. Adjust the released quantity of rinse aid.
Before starting a programme
Before you start the selected programme, make sure
that:
• The filters are clean and correctly installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid (unless you use
multi-tablets).
• The arrangement of the items in the baskets is
correct.
• The programme is suitable to the type of load and
the degree of soil.
• The correct quantity of detergent is used.
Loading the baskets
• Always use the whole space of the baskets.
• Use the appliance to wash dishwasher-safe items
only.
• Do not wash the following materials in the
dishwasher: wood, horn, pewter, copper, aluminium,
delicate ornamented porcelain and unprotected
carbon steel. This can cause them to crack, warp,
discolour, pit or rust.
• Do not wash in the appliance items that can absorb
water (sponges, household cloths).
• Put hollow items (cups, glasses and pans) with the
opening facing downwards.
• Make sure that glasses do not touch each other.
• Put light or plastic items in the upper basket. Make
sure that the items do not move freely.
• Put cutlery and small items in the cutlery basket.
• Make sure that the spray arms can move freely
before you start a programme.
Unloading the baskets
1. Let the tableware cool down before you remove it
from the appliance. Hot items can be easily
damaged.
2. First remove items from the lower basket, then from
the upper basket.
After the programme is completed, water
can still remain on the inside surfaces of
the appliance.
14