CONNECTION
MOUNTING
APPLICATION
DIMENSIONS
PRODUCT FAMILY
The time relay PCM-07 belongs to PCM
relay group
1. Disconnect power supply by the phase
fuse, the circuit-breaker or the switch- di
-
sconnector combined to the proper circuit.
2. Check if there is no voltage on connection
cables by means of a special measure
equipment.
3. Install the PCM-07/U on the TH-35 DIN rail
in the switchboard.
4. Connect the cables with the terminals in
accordance with the installing diagram.
5. Switch on the power supply from the ma
-
ins.
INNER DIAGRAM
RELAY CAPACITY
L(+)
L(+) / N(-)
L(+) / N(-)
N(-)
μC
KLAW.
LCD
ZAS.
Voltage type:
24V - 24 V AC/DC
U - 12÷240 V AC/DC:
available for
PCM-01, PCM-02, PCM-03, PCM-06
U - 24÷250 V AC; 30÷300 V DC:
available for
PCM-07
Device type:
01 - 1 operating mode – switch on delay
02 - 1 operating mode – switch off delay
03 - 1 operating mode – cyclic change over
04 - 8 (PCP-04) or 10 (PCM-04) operating
modes
06 - 2 operating modes - switch on/ switch
off delay
07 - 25 operating modes, digital, two ranges of
time operation
10 - 10 operating modes, two ranges of time
operation
Casing type:
M - modular version (TH 35 DIN rail)
P - flush junction box Ø60 version
Device symbol
The main switch
L(+)
N(-)
The acoustic signal system of starting the machine (engine).
Operating
adjusted to
.
WARRANTY CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.